2025年苹果无损音乐最佳解码器推荐
内容总结：
【2025年苹果无损音乐解码器选购指南】
随着流媒体音质升级，苹果音乐（Apple Music）已成为少数提供免费高解析度无损音频的主流平台。然而要充分享受高清音质，用户常需借助外接解码器（DAC）。本文针对不同使用场景，推荐多款兼容iPhone、Android及电脑设备的实用解码装备，助您提升听觉体验。
核心设备推荐
-
高性价比之选：飞傲KA11解码线
支持32bit/384kHz超高解析度（超越苹果最高24bit/192kHz标准），配备编织耐磨损线材与实时采样率指示灯，即插即用无需充电，售价约30美元，兼顾安卓与iOS设备。 -
轻量化方案：苹果官方转接头
虽仅支持标准无损格式（24bit/48kHz），但轻巧便携且价格亲民，适合非发烧友日常使用。注意高阻抗耳机可能需搭配更强推力设备。 -
无线升级利器：森海塞尔BTD700蓝牙适配器
为iPhone解锁aptX Adaptive/Lossless等高解析蓝牙编码，需搭配支持同编码的耳机使用，LED灯实时显示音质状态，并支持多设备无缝切换。 -
进阶Hi-Fi体验：雪天使Melody DAC
木质机身配备3.5mm/4.4mm双接口，支持384kHz/32bit解析，内置放大器与音效定制APP，兼顾音质与通话功能。 -
桌面与移动两用：Moondrop Moonriver T2i
双DAC芯片带来平衡输出，100级精细音量调节，兼容麦克风输入，音质明亮饱满，适合初探Hi-Fi的用户。 -
一体式解决方案：飞傲SP3 BT有源音箱
集成多格式解码（包括LDAC/aptX HD），支持光纤/RCA/同轴等专业接口，蓝牙与有线双模式，适合家庭与办公场景。 -
旗舰级专业设备：Chord Mojo 2
采用FPGA自定义芯片技术，兼具DAC与耳放功能，推力足以驱动高阻抗耳机，支持多输入接口，专为资深音频爱好者设计。
技术背景
- 苹果设备因蓝牙编码限制（不支持aptX/LDAC），无线聆听无损音质需外接适配器；
- 高解析音频（Hi-Res Lossless）需匹配相应解码硬件，普通转接头仅支持标准无损格式；
- 耳机阻抗（建议低于150欧姆）与解码器推力需合理搭配，否则影响音质表现。
综上，根据预算与使用场景选择合适设备，即可充分释放苹果无损音频的潜力。
中文翻译：
2025年苹果音乐无损播放最佳解码器指南
随时随地享受高保真音质的全套装备
作为少数提供高解析度无损音频且不额外收费的流媒体平台，Apple Music让高品质音乐触手可及。但若想通过手机体验极致音质，通常需要额外硬件支持。本指南将根据您的聆听习惯精准推荐设备，以下每款产品都能充分释放Apple Music订阅服务的音质潜力——事实上无论使用何种音乐服务，这些设备皆能提升听觉体验。更妙的是，大多数推荐设备同时兼容Android、Mac和Windows系统。
随着数据套餐扩容与技术迭代，播放高解析度大体积音频文件已非难事。但硬件层面仍存在挑战：若使用AirPods等无线耳机，由于蓝牙传输限制及苹果设备暂不支持Aptx、LDAC等高解析编解码器，音质将受制约。值得注意的是，Apple Music设有不同等级的无损标准，从标准CD音质（16bit/44.1kHz）到更高采样的高解析无损格式（24bit/192kHz）。不必担心，无论您偏好何种聆听方式，下文皆有对应解决方案。
需知解码器（DAC）或转换器仅是音质方程的一半——耳机与扬声器同样关键。若追求极致听觉盛宴，建议同步参阅我们的《顶级耳机选购指南》。尽管推荐多为无线型号，多数仍支持有线连接，可与下文设备完美搭配。
2025年度精选解码设备
飞傲KA11解码棒（约30美元）
这款亲民的转换器内置支持32bit/384kHz解析度的DAC芯片，远超Apple Music最高规格的24bit/192kHz高解析无损格式，确保完全释放音源潜力。其驱动功率优于苹果官方转接头（详见后文），仅30美元售价即可为iPhone/Android/PC/Mac设备带来超值音质提升，另提供Lightning接口版本兼容旧款苹果设备。
我们特别欣赏其即插即用的简易性——无需充电，仅比常规转接头稍大。编织线缆增强耐用性，正面LED指示灯实时显示音源解析度等级，让您准确把握音质状态。
苹果官方转接头（Lightning/USB-C版本）
如果您追求极致轻便与性价比，这款经典转接头值得考虑。虽不支持高解析格式，但完美兼容标准无损规格（24bit/48kHz）。需注意：对高阻抗耳机（常见于高端Hi-Fi型号）可能推力不足。建议查阅耳机阻抗参数（单位欧姆）——150欧姆以下型号适用，更高阻抗则推荐飞傲产品。
iFi GO Link解码器（MQA专项支持）
本指南虽以Apple Music为核心，但此设备通用各类无损平台。若您是Tidal用户（该平台2024年前采用MQA编码现已转FLAC），这款支持MQA及32bit/384kHz格式的解码器能全面兼容各类高解析音源。
森海塞尔BTD700无线适配器
此设备通过Aptx Adaptive/Lossless等高清编解码器增强手机蓝牙传输能力。iPhone虽原生不支持这些协议，但通过此转换器可体验aptX Lossless带来的高码率传输（理论上提升音质）。需搭配支持相同编码的蓝牙耳机使用。
操作简便：插入USB-C端口配对耳机即可。指示灯实时显示六种蓝牙编码状态，配对信息可跨设备保存。另配备游戏低延迟模式，但仅限USB-C接口设备使用。
雪天旋律解码器（进阶之选）
若追求专业体验却不愿投入天价，这款木纹设计的解码器配备3.5mm/4.4mm双耳机孔（平衡输出接口满足发烧友进阶需求），支持384K/32bit采样率。内置放大器推力充沛，兼容线控麦克风，还可通过专属APP定制音效。
月光宝盒Moonriver T2i解码器
较口香糖略大的机身蕴含双DAC芯片架构，提供3.5mm/4.4mm双接口平衡输出。实体音量旋钮配合100级精细调校（通过配套软件），解决手机音量分级过粗的痛点。支持麦克风透传，音质表现明亮饱满，完美呈现无损音乐细节。
飞傲SP3 BT有源音箱（一体式解决方案）
谁说DAC必须是转换器？这款音箱集成高清解码功能，配备USB-C/AUX/光纤/RCA/同轴多种接口，支持Aptx Adaptive/HD及索尼LDAC编码。虽未亲测，但其音质与做工广受好评，既是桌面办公良伴，亦能融入家庭影音系统（黑胶唱机需额外前置放大器）。
和弦Mojo 2旗舰解码器（650美元）
英国和弦出品的高端之作，采用自主研发的FPGA芯片技术，兼具DAC与前级功放功能。内置电池不耗设备电量，双3.5mm接口可同时驱动两副耳机。提供USB-C/微USB/光纤/同轴多元输入（注意仅支持微USB充电），环形按钮组可实现精密音场调节。
常见问题解答
DAC是什么？
数字模拟转换器（Digital to Analog Converter）负责将数字音频信号转换为可聆听的模拟信号。当今手机电脑虽内置DAC，但通过USB-C/Lightning/蓝牙传输时，信号转换任务实际由转接器或无线耳机承担。专业DAC通常仅专注音频回放，而音频接口还包含麦克风/乐器输入功能。
为何需要外置硬件？
设备内置音频接口最高往往仅支持44.1/48kHz采样率（覆盖绝大多数在线音乐）。若要体验更高采样率/位深的高解析音乐，则需支持相应规格的外置接口与有线耳机，必要时搭配耳机放大器。
需要注意的是："无损"与"高解析"相关却不相同。Apple采用ALAC编码（无损压缩），其无损标准参照CD音质（16bit/44.1kHz）。业界通常将高于44.1kHz采样率的音频称为高解析，现多特指96kHz及以上规格。
能否使用手机附赠转接头？
Lightning/USB-C转3.5mm转接头本质也是音频接口，但多数廉价（或随机附赠）型号最高仅支持48kHz/24bit。Android系统更复杂：部分转接头为被动式（直接调用设备内置DAC），主动式则内置DAC（可连接电脑查看识别信息）。
蓝牙耳机如何选择？
蓝牙音质取决于耳机内置DAC与编解码协议。建议选择支持aptX HD/Adaptive/Lossless编码的型号（需音源设备同步支持）。目前iPhone全系不支持aptX，但可通过外接转换器实现。索尼LDAC等其他高清编码亦值得关注，部分高端无线耳机还配备有线接口供需要时使用。
英文来源：
The best DACs for Apple Music Lossless in 2025
All the equipment you need to listen to hifi audio wherever you are.
Apple Music is one of the few streaming services that offers high-resolution audio (aka “lossless”) at no extra charge. But enjoying that extra quality on your phone usually requires some extra hardware. That is the purpose of this guide, — to help you find exactly what you need depending on how you prefer to listen. Every product listed below will help you squeeze more audio quality out of your Apple Music subscription. In fact, whatever music service you use, your listening experience will be enhanced. Best of all, most of these recommendations are compatible with Android, Mac and Windows devices, too.
Fortunately, as data plans become more generous and technology advances, listening to these larger-files in their full glory is less of a challenge. There are still some hardware hurdles though, especially if you use AirPods (or any wireless headphones) as Bluetooth technology is theoretically capable of delivering some higher-resolution audio, and Apple products don’t support the required technology (codecs such as Aptx, LDAC etc.). Confusingly, there are also different levels of “lossless” on Apple Music, with standard “CD quality” audio and then “Hi-Res Lossless” files that are recorded at even higher data rates. But don’t worry, we have a solution for you below, no matter how you prefer to listen to your music.
Of course, a DAC or dongle is only part of the equation — your headphones or speakers are also just as important. So if you’re looking for the absolute best audio experience be sure to check out our guide to the best headphones. Although these options are wireless, many can be used with a cable, too, making them the perfect pairing for our recommendations below.
Best DACs for 2025
Fiio’s affordable KA11 dongle contains a DAC with a maximum resolution of 32bit/384kHz — which is well above Apple Music’s top-tier “Hi-Res” lossless format (24bit/192kHz) — so you can be sure that you’re getting every last bit of quality out of whatever you’re listening to. Best of all, the KA11 is powerful, too, with a higher volume output than Apple’s on headphone adapter (more on this below). At around $30, this dongle is the best bang for your buck when it comes to upgrading the audio experience on your iPhone, Android, PC or Mac. There’s even a Lightning version available for those with older iPhones and iPads.
We particularly like the simplicity of Fiio’s KA11 as it’s plug-and-play with no need to charge it. It’s only slightly bigger than a typical headphone adapter and it comes with a rugged, woven cable, so it can handle a lot of wear and tear. There’s even a small LED on the front that lets you know if you’re listening to standard, high, or higher-resolution files so you can be confident you’re getting the most out of your music in real time.
Yes, it’s the Apple headphone adapter you know and (maybe) love, but it’s worth considering if you want something super lightweight and even more affordable. Apple’s dongle doesn’t support the larger, Hi-Res files available on its music service, but it can handle the standard lossless (24bit/48kHz) format no problem. As you’d expect, it’s available in Lightning and USB-C versions depending on which Apple device you’re connecting it to.
Sure, the most demanding listeners might lament the lack of support for the higher resolutions, and it can be a little quiet with some headphones that are high impedance (typically more expensive “audiophile” models). For the vast majority of users, though, Apple’s dongle will do the job. If you’re not sure, check the manual for your headphones and look for Impedance (often listed as Ohms) — anything below around 150Ohms and you should be fine. Anything above that, and you might want to consider Fiio’s dongle instead.
While this guide is primarily focused on Apple Music, most of the gear here will unlock lossless audio no matter where you listen. If Tidal is your platform of choice, you might be familiar with the MQA codec, which the company used for its high-resolution audio until eventually switching to FLAC in 2024. MQA might not be as common in streaming anymore, but if you still want to make sure you can listen to music from stores or services that provide it, the iFi GO Link will have you covered, along with the standard Apple Music high resolution audio formats, and anything else, up to 32-bit/384kHz.
Sennheiser’s BTD700 is a wireless adapter that plugs into your phone, upgrading its Bluetooth capabilities with the latest high-resolution codecs such as Aptx Adaptive and Aptx Lossless. iPhones don’t support any of these natively, but with this small dongle, you can unlock the full potential of Bluetooth audio and the higher bitrates (and in theory audio quality) Aptx Lossless offers. There’s a small caveat, though: you will need Bluetooth headphones that also support one of these codecs such as these or these (or check the product page of the set you own or are considering).
The BTD700 is simple to use, just plug it in to your phone’s (or other device’s) USB-C port, pair your headphones to it and off you go. An LED on the dongle lets you know which of the six different Bluetooth “qualities” (codecs) you’re enjoying so you will know when you’re listening to lossless audio. The handy part? Once you’ve paired your headphones with the dongle, you won’t need to re-pair if you connect the BTD700 to a PC or Mac. This little adapter effectively gives anything with a USB-C port an audio upgrade, and there’s even a low-latency mode for gaming. Note, there’s no Lightning option here, so if you’re on an older phone you might have to live with using an adapter.
If you’re looking to take things to the next level without spending “high-end” money, there’s a lot to love about the Melody DAC from Snowsky. Unlike a simple dongle, the Melody has onboard controls and two headphone jacks. One of those is for regular 3.5mm headphones, but the other is for 4.4mm “balanced” headphones, which means the Melody can grow with you if your audio journey takes you deeper into the world of audiophilia.
The wood finish gives it a classy feel and although it’s light, it still delivers that quality “Hi-Fi” feel. As for sound quality, there’s support for 384K/32bit sample rates, which covers everything Apple Music can deliver. The built-in amplifier can easily go louder than you should probably ever listen and there are other luxuries, too, such as support for inline microphones — so you can still handle calls and take meetings on your phone. We also love that you can tailor the sound to your preference via the Fiio Control companion app.
While you can squeeze an impressive amount of audio tech into a headphone adapter, a slightly bigger device affords a decent step up in both specs and features. Moondrop’s Moonriver T2i DAC is slightly larger than a pack of gum, and it has a stylish design that doesn’t look like a boring, generic dongle.
Importantly, the Moonriver T2i builds on the success of the company’s Moonriver 2 DAC. The “2” partly refers to the use of dual DAC chips here, which delivers a “balanced” signal. Each channel can handle up to 32bit/384KHz resolution and there are two headphone ports. One for standard 3.5mm headphones and another for 4.4mm connections — making use of that balanced output. If this is your first step into the world of Hi-Fi DACs, you’re totally fine with 3.5mm headphones, but some prefer the 4.4mm connector as it provides more power and potential signal benefits, especially if you’re using a headphone amp.
With the Moonriver T2i you have a couple more practical advantages. For one, there are physical volume controls on the device itself. If you ever felt that the 16 levels of loudness on the iPhone (I just counted) weren’t enough, then the 100 steps of adjustment on the Moonriver T2i (via companion software) eliminate any worries about setting the music to the perfect level. If your headphones have an in-line microphone, the good news is that this dongle will pass that through to your phone or PC so you won’t need a separate device for calls.
Most importantly, the sound that comes out of the Moonriver T2i is bright and bold. You’ll hear audiophiles talk about sound stage, detail and width, all you need to know is that this DAC ticks off all the buzzwords and serves up bright, robust sound that’s going to make any lossless/hi-res music really shine.
Who said a DAC needs to be a dongle? If you’re looking for something a little more all-in-one then the SP3 BT active speakers from Fiio are a great option. We like that, for the same price as many standalone DACs, you have everything you need to decode high-resolution music from almost any source with USB-C and Aux inputs for phones along with standard Hi-Fi connections such as optical, RCA and coaxial.
These speakers didn’t make it to our testing bench, but the SP3 BTs regularly receive praise for their sound and premium build quality at a reasonable price. For Bluetooth listening, there’s support for both Aptx Adaptive and HD along with Sony’s rival LDAC making these speakers something of an audio swiss-army knife. While these speakers will make a perfect companion to your home office or workspace, they can easily find a home in your living room or den connecting to any other music players you might have (for vinyl you’ll still need a pre-amp).
If you’ve had some experience with DACs and are looking to ratchet things up a notch or three, then the Mojo 2 from British company Chord wants to have a word. At $650, this is definitely in the high-end price range, but the experience and features it offers make it worth considering for serious audiophiles. But the brains behind the Mojo 2 have been making digital to analog converters pretty much since there was digital music to even convert. That experience is what makes the Mojo 2 a favorite among music fans.
Most options in this guide are designed for mobile devices first, the Mojo 2 is more of a hybrid device. The mobile dongles above all take their power from the player you connect them to, which is convenient, but obviously is less kind to your phone’s battery life. The Mojo 2 has an internal cell so won’t tax the one in your phone or laptop. It’s small enough to be portable, but substantial enough to live on your desk.
Unlike most DACs that use off the shelf chips to handle the digital-to-audio conversion, the Mojo 2 uses field programmable gate array (FPGA) technology to create its own custom “chip.” It’s also powerful enough to act as both a DAC and a preamp, driving even power-hungry headphones with ease. We’ve seen FPGA gain popularity in gaming circles for its ability to imitate various consoles, but that same flexibility is what makes it interesting to the audio engineers at Chord.
If you need something that’s capital L loud, then the Mojo 2 will not disappoint. Proceed with caution here. It’s actually powerful enough to drive two pairs of headphones at the same time and has two 3.5mm ports so you can do exactly that. The curious circular buttons can also be used to change sound profiles with an excruciating level of detail.
The Mojo 2 has standard USB-C, microUSB, optical and coax inputs so it’s more flexible than a lot of its competition in this regard. Although it’s worth noting that you can only charge the Mojo 2 via microUSB. Of course, there’s a cable provided for this, but if you’ve fully made the switch to USB-C, it’ll mean you have to guard the charging cable closely.
DAC FAQs
What does DAC stand for?
DAC stands for digital to analogue converter. A digital-to-analog converter takes the digital (D) music from your phone or computer and converts (C) it into analog (A) sound you can hear. All phones and PCs have them, but since handsets moved to USB-C, Lightning or Bluetooth for music, the task of converting that signal was generally outsourced to either your adapter or your wireless headphones.
DACs can be used with phones, laptops and desktops but tend to be much simpler than a regular external audio interface. One basic distinction is that DACs are usually for listening only whereas an audio interface might have ports to plug in microphones and instruments (but an external audio interface is also technically a DAC). Some high-end DACs even include XLR outputs for better connectivity with professional audio equipment.
The best DACs tend to be lightweight, making them more suitable for mobile use, although it still gets a little tricky with the iPhone as you still might need to add another dongle to make it play nice with Lightning. Also, not all DACs support all the higher audio resolutions like DSD. Most standalone DACs require external power or an onboard battery, though some can use the power from whatever you plug them into — in which case expect a hit to your battery life.
Why do I need new hardware to listen to music?
The short answer is, you don’t. You can play “hi-res” audio files on most phones and PCs, you just might not be getting the full experience. If your device’s audio interface tops out at 44.1 or 48kHz (which is fairly common and covers the vast majority of music online) then that’s the experience you’ll get. If you want to enjoy better sounding music at a higher sample rate and bit-depth (aka resolution), you’ll need an interface that supports it and wired headphones, potentially using a headphone amp for an enhanced experience.
It’s worth pointing out that “lossless” and “hi-res” are related terms, but not the same thing and will vary from service to service. Apple uses ALAC encoding which is compressed, but without “loss” to the quality (unlike the ubiquitous .aac or .mp3 file formats). CDs were generally mastered to at least 16-bit / 44.1kHz which is the benchmark that Apple is using for its definition of lossless. In audio circles, a general consensus is that hi-res is anything with a sample rate above 44.1kHz. Increasingly, though, the term is being used for anything 96kHz and above.
This, of course, isn’t only about Apple’s new streaming formats. External DACs and audio interfaces are a great way to get the best sound and upgrade your listening experience generally. Especially if you want to get into the world of more exotic (read: pricey) headphones, as they often even require a DAC to provide enough clean digital signal to drive them. For audiophile headphones, a phone or laptop’s internal sound chipset often doesn’t have the oomph needed to deliver a hi-fi experience, meaning a better DAC could make all the difference in sound quality.
Okay, but can’t I just use the headphone adapter for my phone?
No. Well, yes, but see above. A Lightning or USB-C to 3.5mm headphone adapter often is an audio interface and most of the ones you’re buying for $7 (or that come free in the box) do not support hi-res audio beyond 48kHz / 24-bit. Android is a little more complicated, as some adapters are “passive” and really just connect you to the phone’s internal DAC like old school headphones. Others (active ones) have a DAC built-in and good luck finding out what your specific phone and the in-box adapter delivers. (Hint: connect it to a PC and see if it comes up as an audio interface. You might find some details there if it does).
What about Bluetooth headphones?
Chances are that over the last few years you’ve migrated from wired to wireless headphones (thanks, Apple). The world of Bluetooth headphones changes things a little when it comes to seeking better audio performance. What matters here is twofold, the headphones you’re using (as those will technically be the “DAC”) and the codec — the method used to send the musical data over to the headphones.
It’s also worth checking to see if your headphones support aptX and which version. Look out for aptX HD, aptX Adaptive and (for the highest quality) aptX Lossless which are all better than standard and becoming more common, albeit slowly. It’s worth noting that both your phone or media player and your headphones need to support the same aptX codec. Currently, no iPhone supports any type of aptX, though dongles exist that will offer that functionality.
Other higher-resolution Bluetooth codecs exist, like Sony’s LDAC, but Qualcomm’s AptX has wider support thanks to its prevalence in Android devices. Some high-end wireless headphones might even come with a headphone jack for wired connections when higher-quality audio is needed.